What Product Cleans A 2013 Hyundai Elantra Fabric

Literally every twenty-four hours we accept customers calling to enquire if we can take the stains out of their upholstery or carpeting in their car. There are many different factors that tin determine if we can or tin't remove stains in a auto seat. The historic period of the stain, the severity, and many other factors play a big part in the removal process. Some stains will not be able to be removed. Nosotros use a 3-footstep method. The three-step method includes shampoo, steam agitation, and hot water extraction. Beneath is the driver'south seat of a Hyundai Elantra. Equally you can tell it's in pretty bad condition. Elantras are great cars and they are very nice, simply the seats in the Hyundai Elantras are probably the worst type of seat to keep clean. All one has to do is literally wet their fingertip, bear upon the seat, and it'll leave a stain. In this case, withal, it appears that the owner of the vehicle spilled water, soda popular, coffee, and who knows what else, multiple times. Cheque out the photograph below.

One of the most pop products that we apply is Extractor Soap. It's a low foaming, high pH, carpet and upholstery shampoo that will help suspension downwardly the dirt, grease, and grime that has embedded itself in the seat surface. We kickoff vacuum the affected area of the seat and then spray the upholstery shampoo on the surface. We let it dwell on the seat for nigh three or for minutes and will as well apply a utility scrub brush to make sure the shampoo gets deep within the upholstery fibers. This production will non leave carpet and upholstery fibers potent every bit some other similar products might practice. We practise not dilute the product. Beneath is a photo of the upholstery shampoo.

The next step is to agitate the surface with steam. We use a VX5000 vapor steamer. It has a triangular-shaped castor with medium coarse bristles. Inside of the bristles is where the steam is released into the seat surface. Simply scrub the area for a moment to agitate the top of the seat. This process is bringing 90 percent of the clay and grime to the top of the seat for easy extraction.

Once we finish steam agitating the seat, we immediately begin extracting the seat. We use a Mytee HP60 Heated Extractor. This tool warms the water to 210 degrees and injects information technology into the seat, then immediately sucks it all back up once more into its recovery tank. The HP60 has a very powerful 3 stage vacuum motor, a 1,200-watt water heater, and a 120 psi water pump. This unit is an absolute must-have if y'all're a professional person detailer. Below one can see the beginning process of extraction. For this instance, we started in the centre of the seat to evidence you the difference in the sides of the seats.

The terminal photo beneath indicates how much better the seat looks after shampooing, steam agitation, and extraction. Looking at the beginning photograph and and so the last, there is no comparison. The seat will need to air dry for a little while, and that is why we always supply a plastic seat encompass so that the car can exist driven immediately. Cheers for reading!